Spend Less Time Cleaning and
More Time Enjoying Your RV
How to use Simix Multi-Surface Ceramic Coating
RV EXTERIOR and INTERIOR
PREP PRODUCT Shake gallon well. Simix must be diluted 1:1 with water for use on RVs exteriors. For easier handling, pour desired amount into clean, new smaller container. Add an equal amount of water. PREP SURFACE Thoroughly clean and remove any visible surface contaminants. Clay bar if needed. Do any needed paint correction. APPLY Only work small areas at a time. Dampen microfiber cloth or foam applicator sponge with water. Apply product onto the surface with horizontal and vertical motions. Dry buff immediately with second microfiber cloth in similar manner until product is completely absorbed. |
GLASS/MIRRORS
PREP PRODUCT This coating must be diluted for glass and mirrors. Dilution rate is 4 parts water to 1 part coating. Pour water into clean, new spray bottle first. Add coating and shake. PREP SURFACE Thoroughly clean surface. APPLY Only work small areas at a time. Dampen microfiber cloth or foam applicator sponge with water. Spray mixture to dampened cloth or sponge. Apply product onto the surface with horizontal and vertical motions. Dry buff immediately with second microfiber cloth in similar manner until product is completely absorbed. Note: You can spray directly onto surface. Any overspray must also be dry buffed. |