Keep customers, staff and students safe with Simix
​VCT with acrylic floor finish: Hygiena Luminometer ATP reading on healthcare facility floor that was just cleaned with an autoscrubber and a competitor's cleaner was 161. That means the floor is completely contaminated and needs to be immediately re-cleaned.
VCT floor with Simix High Shine Antimicrobial Coating: Cleaned daily using an autoscrubber and Simix Multi-Surface Cleaner / Degreaser / Sanitizer.
After Simix: ATP reading after cleaning and coating with Simix is 2. The CDC accepts ATP readings as an objective measurement of the cleanliness of surfaces. Anything less than 10 is considered sterile.
Beautiful VCT Floors with Less Work
These VCT tile floors were put into these classrooms sometime in the 1960s. Students have been walking across them and scraping desks and chairs across them for decades.

These results are possible with Simix Cleaner / Degreaser / Sanitizer and Simix High Shine Ceramic Coating.
Simix Cleaner / Degreaser / Sanitizer is proven to remove coronavirus
 A new study done by Situ Biosciences Microbial Product Test Laboratory shows that Simix Cleaner / Degreaser / Sanitizer removes 99.9% of coronavirus and 99.7% of norovirus from non-porous surfaces like VCT tile.
How to transition your VCT tile floor from acrylic floor finish to Simix High Shine Ceramic Coating
  • Step 1: Strip thoroughly with stripping solution and Simix.
  • Step 2: Rinse with 220 grit diamond pads, 800 grit diamond pads, and red pads.
  • Step 3: Apply 4 coats.
  • Step 4: Autoscrub with the 800 the next day.
  • Step 5: Apply 4 more coats.
  • Step 6: Wet polish with a 3000 diamond.
Surface preparation is the key to a successful transition. You have to completely rid the surface of acrylic floor finish and residue before coating.
High, Safe pH Keeps Customers, Staff, Students and Patients Healthy
Germs live and grow on surfaces that have a pH level between 4.8 and 9.2. While most cleaning and coating products are pH neutral, Simix Cleaner (pH 11.4) and Coatings (pH 12.3) create a permanent, safe, high pH that prevents the growth of germs and biofilm. With Simix, you can easily maintain a clean environment that does not support germ growth.

Great Looking Floors Need Just Two Products

Simix Multi-Surface Cleaner / Degreaser / Sanitizer

$64.00
Shop

Simix High Shine Ceramic Floor Coating

$245.00
Shop

Case of 4 Simix High Shine Ceramic Floor Coating

$780.00
Shop

Case of 4 Simix Multi-Surface Cleaner / Degreaser / Sanitizer

$228.00
Shop

Simix Multi-Surface Ceramic Coating

$245.00
Shop

Simix A/C Ceramic Coating

$150.00 $49.00
Shop

Case of 4 Simix A/C Ceramic Coating

$159.00
Shop

Case of 4 Simix Multi-Surface Ceramic Coating

$780.00
Shop
Transitioning to Simix is Easy
First, you strip for the last time and remove all the old coating. Then you coat the floor with Simix High Shine Ceramic Floor Coating. Afterwards, you clean and maintain the floor with Simix Multi-Surface Cleaner / Degreaser / Sanitizer.
Simix: Safe, Clean and Healthy Floors with Less Work
  • Never strip again
  • Long-lasting layer of antimicrobial protection
  • High traction
  • Less slippery
  • Easy to apply
  • Fast drying time
  • Water-based - Zero VOC - No odor
  • Less expensive than floor finish
Clean and Shine VCT Floors at the Same Time with Simix
You can clean and shine VCT floors at the same time with Simix. No more stripping. No more burnishing.

This old VCT tile floor was coated with Simix High Shine Ceramic Floor Coating six months ago and has not been burnished since.